LePresso Crema Pro Multi-Capsule Coffee Machine with Double Boiler, Milk Frothing System, Capsule Holder, Ground Coffee Holder, 200mL Milk Tank Capacity, 850mL Water Tank Capacity, 3-Pin UK Plug Power, Automatic Shutdown - Black

FAQ

• Which specific capsule types are compatible with this machine?

  The Crema Pro includes interchangeable adapters designed for Nespresso Original, Dolce Gusto, and ground coffee (powder). It is not compatible with Nespresso Vertuo pods or specialized systems like Tassimo or Caffitaly.

• How do I switch between the different capsule adapters?

  Simply lift the top lever to its vertical position, slide out the current adapter tray, and insert the one corresponding to your chosen coffee type. Ensure the adapter is pushed in fully before lowering the lever, as the 19-bar high-pressure pump requires a secure seal to prevent leaking.

• Can I adjust the coffee temperature if I prefer a hotter drink?

  The machine features a 1450W fast-heating system that maintains a consistent extraction temperature of approximately 92°C to 95°C. While there is no manual temperature dial, pre-heating your cup with a "blank" water shot (running a cycle without a capsule) will help maintain maximum heat in the final beverage.

• Is it possible to program the cup size for a large mug?

  Yes, both the "Small Cup" and "Large Cup" buttons are programmable to suit your preference. Press and hold either button until your desired volume is reached, then release; the machine will remember this flow time for all subsequent uses until reset to factory defaults.

• What should I do if the machine fails to puncture the capsule?

  This typically occurs if the lever is not pressed down with enough force or if the adapter is slightly misaligned. Check that the capsule is seated flat within the tray and that there is no old foil or buildup obstructing the internal needles; a quick rinse of the adapter under warm water usually resolves most piercing issues.